Water-based ink

Product

Hot keywords

Contact us

Enterprise:KZINKS

Contact : Miss Lin  13380514330

Contact : Mr. Tan 13631486571

Number:0757-27382322 & 27382399

E-mail:kzinks@kzinks.com

Fax:0757-27382328

Website : en.kzinks.com

Address:No.2, keji 2nd road, xingtan industrial zone, xingtan town, shunde district, foshan city, guangdong province

Water based gravure lamination ink

Your current location: Home >> Products >> Waterborne series

Water based gravure lamination ink

  • Taxonomy:Waterborne series

  • Click times:
  • Date of release:2019/03/20
  • Specifications:
  • Type:
  • inquiry
  • introduce

N9 water-based series—Water based gravure lamination ink

N9 series · gravure water-based plastic compound ink is developed by our company, safe and environment-friendly, suitable for gravure rotary printing. This product is mainly suitable for surface treatment of BOPP, BOPET and other film inside printing compound, such as food bags, medicines, sanitary supplies and cosmetics and other packaging materials printing.


I. Product features:

1, high consistency and low viscosity, high gloss

2, Suitable for medium and high speed gravure printing

3, strong adhesion, high composite strength, excellent weather resistance

4, with water or alcohol as diluent, safe and environmental protection


Ii. Applicable substrate:

Suitable for gravure printing of various plastic films, as shown in the table below:

The printing substrate

Film type

Degree of treatment (dyne)

BOPP

≥38

BOPET

42-48

 

Functional structure

BOPP/CPP

BOPP/LDPE

BOPP/PET/PE

BOPP/AL/PE

BOPET/VMPET/PE

BOPET/AL/PE

Note: please pass full test before use.

 

Iii. Technical indicators

Depth of the network

25μm-35μm

Relative humidity of workshop

65%以下

Air volume per unit

3500m³/H-4000m³/H

Oven temperature

65℃-80℃(The temperature should be adjusted as high as 

possible within the bearing range of the film)

Note: please pass the full test before use. The actual parameters should be determined according to the equipment situation, production environment and customer requirements.


Iv. Instructions:

Dilution ratio

Diluent class

Quick dry

dry

Slow dry

Pure water

1

3

5

ethanol

9

7

5

 

Printing viscosity

White ink

13seconds-16seconds


The color

15seconds-18seconds


3 # zahn cup (25 ℃), viscosity according to the depth of the plate, printing speed accordingly.



Note: the ratio of diluent and printing viscosity shall be determined according to printing equipment, climatic conditions and other factors. Please pass the full test before use.


V. Matters needing attention:

Number

Matters

The main points of

1

Stir before using the

Before use should be fully stirred, so that the ink has good mobility.

2

Avoid mixed

Our ink system is unique and cannot be mixed with other types of ink to avoid unnecessary losses caused by incompatibility.

3

Oven conditions

1, ensure that the oven into the air and exhaust air to be large, exhaust air system is normal, negative pressure environment in the oven (the hot air in the oven can not blow on the printing plate) to ensure the rapid discharge of moisture and moisture;

2, set in the oven temperature of 65 ℃ to 80 ℃, in printing base material can withstand the range, the temperature should increase as far as possible, is advantageous for the ink dry.

4

To prevent the boards

1, the oven hot air can not be blown on the plate, to avoid ink blocking version;

2, replace the substrate or temporarily stop, please keep the plate roll in the ink tank rotation;

3. In the process of printing, if the machine is switched on again after stopping the plate for a long time, the plate roller can be rotated in the ink tank for a few minutes and the plate can be wiped with solvent or ink in the ink tank to continue printing.

5

Version roller clean

After printing, please clean the plate roller with ethanol and brush the anti-rust oil for normal use next time.

6

Residual ink recovery

At the end of printing, the remaining ink should be packed in a clean plastic drum, the mouth of the drum must be sealed, and the filter should be used again.

Note: the above data is obtained by our company only, and the result will not be the same according to the different materials and processing conditions, please confirm before use.


Vi. Storage and packaging

Storage: placed in ventilation shade (5 ℃ to 35 ℃) seal preservation, fire prevention is prevented bask in, avoid the rain and pollution, one year warranty.

Packing: plastic drum packing, 18KG/ drum, 20KG/ drum, 25KG/ drum, 50KG/ drum.


Warning to users: this document is based on the company's internal production and experimental results, users should be fully tested before use to ensure that the products meet their own requirements and master the correct use of the product method. Due to the unforeseeable and uncontrollable use conditions of the products, the information in this paper is only for the user's reference, not as a basis for quality assurance, and the user shall not be jointly and severally liable for the results of the use of the products.

凹版水性塑料复合油墨

The address of this article:http://en.kzinks.com/product/583.html

Key word:水性复合油墨制造商,塑料复合油墨厂家,水性复合油墨商家

Recently browse:

National unified customer service hotline:

0757-27382322 & 27382399

Contact : Mr. Tan  13631486571

Contact : Miss Lin  13380514330

E-mail:kzinks@kzinks.com

Website : en.kzinks.com

Address:No.2, keji 2nd road, xingtan industrial zone, 

xingtan town, shunde district, foshan city

水性油墨厂家

Scan, follow us

  • Service
  • number
    13380514330
  • Message
  • Online Service
    Please leave a message for us
    Please input the message here, and we will contact you.
    Name
    Name
    Tel
    Tel
    Mail
    Mail
    Add
    Add